P35 & P38 Monoblock Directional Control Spool Valve

Description

Manually or mechanically controlled hydraulic distributor Р35 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). Relief valve is integrated therein.

Construction

Р35 is a mono-bloc distributor. Its body is made of cast iron EN-GJL300. Spool is made of carburized steel with hard chrome plating.

Mounting

Fixing is with two bolts M8.

Ambient temperature	-40C...+60C
Viscosity	12 ...800 mm2/s
Fluid temperature	-15C...+80C
Filtration	10 to NAS 1638
Max operating pressure	315 bar
Back pressure	50 bar
Nominal flow	35 l/min
Leakage	10-15 cm3/min at 120 bar

P38 Monoblock Directional Control Spool Valve

Description

Manually or mechanically controlled hydraulic distributor Р38 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is similar to P35, but has outlets P and T on the side of openings A and B.

Construction

Р38 is a mono-bloc distributor. Its body is made of cast iron EN-GJL300. Spool is made of carburized steel with hard chrome plating.

Mounting

The distributor is fixed with two bolts M8.

Ambient temperature	-40C...+60C
Viscosity	12 ...800 mm2/s
Fluid temperature	-15C...+80C
Filtration	10 to NAS 1638
Max operating pressure	315 bar
Back pressure	50 bar
Nominal flow	35 l/min
Leakage	10-15 cm3/min at 120 bar



Product: P35 P35RA1GKZ1 3/8 Price/Unit: 40 EUR Qty:	Product: P38 P38RA1GKZ1 3/8 Price/Unit: 45 EUR Qty:


Product: P35BasEmValfi Comform with P35 & P38 Price/Unit: 15 EUR Qty:	Product: P35-Dedant Comform with P35 & P38 Price/Unit: 7 EUR Qty:	Product: P35-Kol-Kapak Comform with P35 & P38 Price/Unit: 10 EUR Qty:	Product: P35-Yay-Kapak Comform with P35 & P38 Price/Unit: 3 EUR Qty:


Product: P35-Sap Comform with P35 & P38 Price/Unit: 2 EUR Qty: